How to Install Windows 7 and Windows XP from the flash

In general to install windows xp windows 7 and we use the cd / dvd as bootingnya. But it would be a big problem, if the DVD RW or a laptop computer is broken. If the DVD RW is damaged we certainly will not be able to boot windows from cd / dvd. Solution.? Use the DVD RW external, to install windows 7 or windows. That means the first, second way is to use flash as a boot windows 7 or windows xp, and this is the easiest way. We will use the second way.

Stage of preparation to install windows 7 or windows XP from the flash.

* Applications WinToFlash,

* Flash 1 GB (For booting Windows XP)

* Flash 4 GB (To boot windows 7)

How to Make booting Windows 7 And Windows XP With flash

1. Please download WinToFlash, by clicking the download link above. Extract the files then open WinToFlash.exe -> Accept

2. The following display appears, click the check mark -> click Next

3. Insert the Windows XP boot CD or boot of Windows 7.

You can borrow a friend's computer to boot windows xp and windows 7 is

4. Plug the flash 1 GB (If you make a boot Windows XP), flash 4 GB (If you make a boot windows 7)

5. Back to WinToFlash. In the field of Windows file path to specify where the position of the cd boot windows Xp or Windows 7, and on the field determine where the position of the USB flash drive counterparts, click Next. See picture.

Note: "Make sure the contents of the flash had been fellow to move, because the flash will be formatted"

6. Windows License Agreement appears, check the I Accept ..., click continue.

7. The process of copying the boot from the CD / DVD to the flash will be running, wait until finished.

8. Beres, flash is ready to be used as a boot.

How to Install Windows XP With flash

1. Plug the flash that already contains the Windows XP boot, then turn on the computer.

2. Log into the BIOS by pressing F2 when the new computer is turned on, change the primary boot with flash (USB-HDD), if the flash has been in plug, there will appear the name of our flash, click F10 to save the settings.

3. Two options will appear when the computer or laptop to boot via flash. First, select 1. .. TEXT SETUP, press Enter, then do the installation as usual.

4. After the computer restarts, Select 2. .. Gui mode, press enter.

Remember ..! Gui Mode

5. If the computer restarts again, select the Gui Mode ..

6. Continue installation as usual.

7. Please unplug the flash, after a desktop computer or laptop open